Publications and Doctoral Dissertations

2021

1. NKOU BOUALA G.I., ETIEMBLE A., DASSONNEVILLE S., DER LOUGHIAN C., LANGLOIS C., PIERSON J.F., STEYER P.: « Structural and microstructural evolution of amorphous Zr-Cu-Ag thin-film alloys under thermal constraint: An in situ approach, Journal of Alloys and Compounds”. Journal of Alloys and Compounds, vol. 851, 156908, 8p.
2. EL GHOSSEIN N., SARI A., VENET P., GENIES S., AZAIS P.: « Post-Mortem Analysis of Lithium-Ion Capacitors after Accelerated Aging Tests”. Journal of Energy Storage, vol. 33, 102039, 10p.
3. TOURET T., CHANGENET C., VILLE F., CAVORET J.: « Experimental investigations on the effect of micropitting on friction – Part 2: analysis of power losses evolution on a geared system”. Tribology International, vol. 153, 106551, pp. 1-9
4. QUIBAN R., CHANGENET C., MARCHESSE Y., VILLE F.: « Experimental investigations about the power loss transition between churning and windage for spur gears”. ASME Journal of Tribology, vol.143 (2): 024501, 6p.
5. GHALAMBAZ M., MEHRYAN S.A.M., HAJJAR A., YOUNIS O., SHEREMET M.A., POUR M.S., HULME-SMITH C.: “Phase-Transition Thermal Charging of a Channel-Shape Thermal Energy Storage Unit: Taguchi Optimization Approach and Copper Foam Inserts”. Molecules, vol. 26 (5), 1235, 23 p.
6. GHALAMBAZ M., MEHRYAN S.A.M., HAJJAR A., FTEITI M.A., YOUNIS O., SARDARI P.T., YAICI W.: “Latent Heat Thermal Storage in Non-Uniform Metal Foam Filled with Nano-Enhanced Phase Change Material”. Sustainability, vol. 13 (4), 2401, 25p.
7. ATLI A., TROUILLET V., CADETE SANTOS AIRES F.J., EHRET E., LEMAIRE E., SIMON S.: « A generalized sample preparation method by incorporation of metal–organic compounds into polymers for electroless metallization”. Journal of Applied Polymer Science, vol. 138, issue 17, 50276.
8. BROSSIER P., NIEL D., CHANGENET C., VILLE F., BELMONTE J.: « Experimental and numerical investigations on rolling element bearing thermal behaviour”. IMechE, Part J, Journal of Engineering Tribology, vol. 235, issue 4, pp.842-853.
9. JACQUET P., VAUCHERET A., COUDERT J.B., MONDELIN A., CHOMER S.: “Traitements de cémentation/carbonitruration sous pression réduite d’un acier inoxydable martensitique ». Traitements & Matériaux, n°469, pp. 13-17.
10. ALSABERY A.I., HAJJAR A., SHEREMET M.A., GHALAMBAZ M., HASHIM I.: “Impact of particles tracking model of nanofluid on forced convection heat transfer within a wavy horizontal channel”. International Communications in Heat and Mass Transfer, vol.122: 105176, 11p.
11. XIONG Q., HAJJAR A., ALSHURAIAAN B., IZADI M., ALTNJI S., SHEHZAD S.A.: “State-of-the-art review of nanofluids in solar collectors: A review based on the type of the dispersed nanoparticles”. Journal of Cleaner Production, vol.310: 127528, 20p.
12. BONI J.B., CHANGENET C., VILLE F.: « Analysis of flow regimes and associated sources of dissipation in splash lubricated planetary gear sets”. ASME Journal of Tribology, vol.143 (11): 111805, 8p.
13. QUIBAN R., GRENET N., TOURET T., NAVET P., DIAB Y., CAVORET J., VILLE F., CHANGENET C.: « On the interest of a semi-empirical model for the tooth friction coefficient in gear transmissions”. IMechE, Part J, Journal of Engineering Tribology, vol. 235, issue 12, pp.2654-2663.
14. CARPENTIER M., MOGNIOTTE J.F., LE M.Q., ALLARD B., CLERC G., COTTINET P.J.: “A multi-physics approach to condition monitoring of SiC power module”. Microelectronic Engineering, vol. 250: 111633, 8p.
15. FOUREL L., NOYEL J.P., BOSSY E., KLEBER X., SAINSOT P., VILLE F.: “Towards a grain-scale modeling of crack initiation in rolling contact fatigue – Part 1: Shear stress considerations”. Tribology International, vol. 164: 107224, 11p.
16. COFFIGNIEZ M., GREMILLARD L., PEREZ M., SIMON S., RIGOLLET C., BONJOUR E., JAME P., BOULNAT X.: « Modeling of interstitials diffusion during debinding/sintering of 3D printed metallic filaments: Application to titanium alloy and its embrittlement”. Acta Materialia, vol. 219: 117224, 13p.
17. FOUREL L., NOYEL J.P., BOSSY E., KLEBER X., SAINSOT P., VILLE F.: “Towards a grain-scale modeling of crack initiation in rolling contact fatigue – Part 2: Persistent slip band modeling”. Tribology International, vol. 163: 107173, 9p.
18. LEMAIRE E., THUAU D., DE VAULX J.B., VAISSIERE N., ATLI A.:  » Rochelle Salt-Based Ferroelectric and Piezoelectric Composite Produced with Simple Additive Manufacturing Techniques”. Materials, vol. 14 (20): 6132, 11p.
19. BEN YOUNES E.: « Optimisation durable et multicritères de dentures d’engrenages cylindriques »
20. NAVET P.:« Etude d’une transmission par engrenages en conditions marginales de lubrification »

2020

1. TOURET T., CHANGENET C., VILLE F., CAVORET J., ABOUSLEIMAN V.: « Experimental investigations on the effect of micropitting on friction – Part 1”. Tribology International, vol. 149, 105678, pp. 1-7
2. QUIBAN R., CHANGENET C., MARCHESSE Y., VILLE F., BELMONTE J.: « Churning losses of spiral bevel gears at high rotational speed”. IMechE, Part J, Journal of Engineering Tribology, vol. 234, issue 2, pp.172-182
3. VAUDREY A., CUISANO J.: “Internal combustion engines water injection fed by Exhaust Water Recirculation (EWR): a feasibility analysis”. Automotive and Engine Technology, vol. 5, pp. 21-28
4. TREVISAN L., BORDIGNON M.: “Screening Life Cycle Assessment to compare CO2 and Greenhouse Gases emissions of air, road, and rail transport: an exploratory study”. PROCEDIA CIRP, vol. 90, pp. 303-309
5. HAJJAR A., MEHRYAN S.A.M., GHALAMBAZ M.: “Time periodic natural convection heat transfer in a nano-encapsulated phase-change suspension”. International Journal of Mechanical Sciences, vol. 166, 105243, pp. 1-10
6. MEHRYAN S.A.M., HEIDARSHENAS M. H., HAJJAR A., GHALAMBAZ M.: “Numerical study of melting-process of a non-Newtonian fluid inside a metal foam”. Alexandria Engineering Journal, vol. 59, Issue 1, pp. 191-207
7. ALSABERY A.I., HASHIM I., HAJJAR A., GHALAMBAZ M., NADEEM S., SAFFARI POUR M.: “Entropy Generation and Natural Convection Flow of Hybrid Nanofluids in a Partially Divided Wavy Cavity Including Solid Blocks”. Energies, vol. 13 (11), 2942, pp. 1-25
8. GHALAMBAZ M., MEHRYAN S.A.M., HAJJAR A., VEISMORADI A.: “Unsteady natural convection flow of a suspension comprising Nano-Encapsulated Phase Change Materials (NEPCMs) in a porous medium”. Advanced Powder Technology, vol. 31, Issue 3, pp. 954-966
9. MEHRYAN S.A.M., GHALAMBAZ M., GARGARI L.S., HAJJAR A., SHEREMET M.: “Natural convection flow of a suspension containing nano-encapsulated phase change particles in an eccentric annulus”. Journal of Energy Storage, vol. 28, 101236, 12p.
10. MEHRYAN S.A.M., GHALAMBAZ M., FEEOJ R.K., HAJJAR A., IZADI M.: “Free convection in a trapezoidal enclosure divided by a flexible partition”. International Journal of Heat and Mass Transfer, vol. 149, 119186, 14p.
11. GHALAMBAZ M., MEHRYAN S.A.M., ELSABERY A., HAJJAR A., IZADI M., CHAMKHA A.: “Controlling the natural convection flow through a flexible baffle in an L-shaped enclosure”. Meccanica, vol. 55, pp. 1561-1584
12. OGAWA Y., HOSOI H., TSUZAKI K., REDARCE T., TAKAKUWA O., MATSUNAGA H.: “Hydrogen, as an alloying element, enables a greater strength-ductility balance in an Fe-Cr-Ni-based, stable austenitic stainless steel”. Acta Materialia, vol. 199, pp. 181-192
13. GHALAMBAZ M., MEHRYAN S.A.M., TAHMASEBI A., HAJJAR A.: “Non-Newtonian phase-change heat transfer of nano-enhanced octadecane with mesoporous silica particles in a tilted enclosure using a deformed mesh technique”. Applied Mathematical Modelling, vol. 85, pp. 318-337
14. NAVET P., CHANGENET C., VILLE F., GHRIBI D., CAVORET J.: « Thermal modeling of the FZG test rig: application to starved lubrication conditions”. Tribology Transactions, vol. 63, n°6, pp. 1135-1146
15. EL GHOSSEIN N., SARI A., VENET P.: « Development of a capacitance versus voltage model for lithium-ion capacitors ». Batteries, vol. 6, issue 4: 6040054, 13p.
16. HAJJAR A., JAMESAHAR E., SHIRIVAND H., GHALAMBAZ M., MAHANI R. B.: “Transient phase change heat transfer in a metal foam-phase change material heatsink subject to a pulse heat flux”. Journal of Energy Storage, vol. 31, 101701, 17p.
17. GHALAMBAZ M., MEHRYAN S.A.M., MASHOOFI N., HAJJAR A., CHAMKHA A., SHEREMET M., YOUNIS O.: “Free convective melting-solidification heat transfer of nano-encapsulated phase change particles suspensions inside a coaxial pipe”. Advanced Powder Technology, vol. 31, Issue 11, pp. 4470-4481

2019

1. NIEL D., CHANGENET C., VILLE F., OCTRUE M.: « Thermomecanical study of high speed rolling element bearing: a simplified approach”. IMechE, Part J, Journal of Engineering Tribology, vol. 233, issue 4, pp. 541-552
2. VAUDREY A.: “Thermodynamics of indirect water injection in internal combustion engines: Analysis of the fresh mixture cooling effect”. IMechE, International Journal of Engine Research, vol. 20, issue 5, pp. 527-539
3. CANDELIER K., ATLI A., ALTEYRAC J.: “Termite and decay resistance of bioplast-spruce green wood-plastic composites”. European Journal of Wood and Wood Products, vol. 77, issue 1, pp. 157-169
4. RUZEK M., VILLE F., VELEX P., BONI J.B., MARCHESSE Y.: « On windage losses in high-speed pinion-gear pairs”. Mechanism and Machine Theory, vol. 132, pp. 123-132
5. NIEL D., CHANGENET C., VILLE F., OCTRUE M.: « A new test rig to study rolling element bearing thermomechanical behavior”. Power Transmission Engineering, vol. 13, n°3, pp. 50-55
6. MARCHESSE Y., CHANGENET C., VILLE F.: « Drag power loss investigation in cylindrical roller bearings using CFD approach”. Tribology Transactions, vol. 62, n°3, pp. 403-411
7. CADIOU F., ETIEMBLE A., DOUILLARD T., WILLOT F., VALENTIN O., BADOT J.C., LESTRIEZ B., MAIRE E.: « Numerical Prediction of Multiscale Electronic Conductivity of Lithium-Ion Battery Positive Electrodes”. Journal of The Electrochemical Society, vol.166, n°8, pp. 1692-1703
8. CARETTE L., JACQUET P., COTTON D., VIGNAL V., FAURE S.: « TaC/Ta2C bilayer formed on carburized and annealed tantalum; development of a numerical growth model”. Applied Surface Science, vol. 467-468, pp. 84-88
9. GOLABCZAK M., MAKSIM P., JACQUET P., GOLABCZAK A., WOZNIAK K., NOUVEAU C.: “Investigations of geometrical structure and morphology of samples made of hard machinable materials after Wire Electrical Discharge Machining (WEDM) and vibro-abrasive finishing”. Material Science and Engineering Technology, vol. 50, issue 5, pp. 611-615
10. ENGOZOGHO ANRIS S.P., BIKORO BI ATHOMO A., VIDAL M., DENAUD L., SAFOU TCHIAMA R., CHARRIER B.: “Extraction and Characterization of Aucoumea klaineana Pierre (Okoume) Extractives”. Journal of Renewable Materials, vol.7, n°6, pp. 517-522
11. KONE C., MARCHESSE Y., PANNETON R.: « Numerical Approach for Possible Identification of the Noisiest Zones on the Surface of a Centrifugal Fan Blade”. Openfoam Selected Papers of the 11th Workshop, Springer International Edition, pp. 341-355.
12. MESSAOUDENE Z.: “Lean thinking as a learning strategy at the service of global development”. Lean Engineering for Global Development, Springer International Publishing, 403p. (pp. 33-60)
13. BESNARD A., ARDIGO M.R., IMHOFF L., JACQUET P.: “Curvature Radius Measurement by Optical Profiler and Determination of the Internal Stress”. Applied Surface Science, vol. 487, pp. 356-361
14. NICOLI C., CARTON J.F., VAUCHERET A., JACQUET P.: « Caractérisation de la propreté inclusionnaire d’aciers de fonderie par analyse d’images en Microscopie Electronique à Balayage ». Metallurgical Research & Technology, vol. 116, n°5, 7p.
15. BONI J.B., CHANGENET C., VILLE F.: « A model for predicting churning losses in planetary gears”. Power Transmission Engineering, vol. 13, n°6, pp. 59-63
16. RUZEK M., MARCHESSE Y., VILLE F., VELEX P.: “Windage power loss reductions in high-speed gear pairs”. Forschung im Ingenieurwesen, vol. 83, Issue 3, pp. 387-392
17. BOSSY E., NOYEL J.P., KLEBER X., VILLE F., SIDOROFF C., SIMON T.: “Competition between surface and subsurface rolling contact fatigue failures of nitrided parts: a Dang Van approach”. Tribology International, vol. 140, 105888, pp. 1-8
18. VOUAILLAT G., NOYEL J.P., VILLE F., KLEBER X., RATHERY S.: “From Hertzian contact to spur gears: analyses of stresses and rolling contact fatigue”. Mechanics & Industry, vol. 20, n°6, 16p.

2018

1. BENALLOUCH M., OUTBIB R., BOUTAYEB M., LAROCHE E.: “Robust Observers for a Class of Nonlinear Systems Using PEM Fuel Cells as a Simulated Case Study”. IEEE Transactions on Control Systems Technology, vol. 26, n°1, pp. 291-298
2. TOURET T., CHANGENET C., VILLE F., LALMI M., BECQUERELLE S.: « On the use of temperature for online condition monitoring of geared systems – A review”. Mechanical Systems and Signal Processing, vol.101, pp.197-210
3. LANZETTA F., VAUDREY A., BAUCOUR P.: « A new method to optimise finite dimensions thermodynamic models: application to an irreversible Strirling engine”. International Journal of Ambient Energy, vol.39, issue 4, pp.392-405
4. LEMAIRE E., AYELA C., ATLI A.: « Eco-friendly materials for large area Piezoelectronics: self-oriented Rochelle salt in wood”. Smart Materials and Structures, vol.27 (2), 15p.
5. FOSSIER C., CHANGENET C., VILLE F., BARDAY D., BERIER V.: « Investigations on drive axle thermal behaviour: power loss and heat transfer estimations”. SAE International Journal of Engines, vol.11 (1), 12p.
6. MENUT M., BOUSSEL L., ESCRIVA X., BOU-SAID B., WALTER-LE-BERRE H., MARCHESSE Y., MILLON A., DELLA-SCHIAVA N., LERMUSIAUX P., TICHY J.: « Comparison between a generalized Newtonian model and a network-type multiscale model for hemodynamic behavior in the aortic arch: Validation with 4D MRI data for a case study”. Journal of Biomechanics, vol.73, pp.119-126
7. GOLABCZAK M., SWIECIK, GOLABCZAK A., NOUVEAU C., JACQUET P., BLANC C.: « Investigations of surface layer temperature and morphology of hard machinable materials used in aircraft industry during abrasive electrodischarge grinding (AEDG) process”. Materials Science & Engineering Technology, vol. 49, Issue 5, pp. 568-576
8. NGUYEN T.P., LEMAIRE E., EUPHRASIE S., THIERY L., TEYSSIEUX D., BRIAND D., VAIRAC P.: « Microfabricated high temperature sensing platform dedicated to scanning thermal microscopy (SThM)”. Sensors and Actuators A: Physical, vol. 275, pp. 109-118
9. ATLI A., CANDELIER K., ALTEYRAC J.: “Mechanical, thermal and biodegradable properties of bioplast-spruce green wood polymer composites”. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, vol. 12, n°5, pp. 231-243
10. ISAAC G., CHANGENET C., VILLE F., CAVORET J., BECQUERELLE S.: « Thermal analysis of twin-disc machine for traction tests and scuffing experiments”. IMechE, Part J, Journal of Engineering Tribology, vol. 232, issue 12, pp. 1548-1560
11. MESSAOUDENE Z.: “Paradoxes and organizational learning in continuous improvement approaches: using the TRIZ principles for developing problem solving performance in a Michelin plant”. Automated Invention for Smart Industries, Springer International Publishing, pp. 40-51

2017

1. ATLI A., SIMON S., CADETE SANTOS AIRES F.J. CARDENAS L., EHRET E., LOURDIN P.: « A new strategy to activate liquid crystal polymer samples for electroless copper deposition ». Journal of Applied Polymer Science, vol. 134, Issue 1: 44397, 12p.
2. NEUROUTH A., CHANGENET C., VILLE F., OCTRUE M.: « Influence of rolling element bearing modeling on the predicted thermal behavior of the FZG test rig”. Tribology Transactions, vol.60, Issue 4, pp. 753-761
3. COTTON D., JACQUET P., FAURE S., VIGNAL V.: « Epitaxial growth of tantalum carbides by lowcarbon flow carburizing”. Materials Chemistry and Physics, vol.192, pp. 170-180
4. MESSAOUDENE Z., CHIRINOS-COLMENARES O., DUC F.: « La pérennisation des démarches d’amélioration continue ». JITEC, N°204, pp. I-VIII
5. MESSAOUDENE Z.: « Application of Lean education in ECAM Lyon for development lean management training”. Lean education: an overview of current issues, Springer International Publishing, pp. 85-98
6. NEUROUTH A., CHANGENET C., VILLE F., OCTRUE M., TINGUY E.: “Experimental investigations to use splash lubrication for high-speed gears”. ASME Journal of Tribology, vol.139 (6), 061104, 7p.
7. LARUELLE S., FOSSIER C., CHANGENET C., VILLE F., KOECHLIN S.: « Experimental investigations and analysis on churning losses of splash lubricated spiral bevel gears”. Mechanics & Industry, vol.18 (4), 412, 10p.
8. KONE T.C., MARCHESSE Y., PANNETON R.: « A Numerical Approach to Possible Identification of the Noisiest Zones of a Wall Surface with a Flow Interaction”. Open Journal of Fluid Dynamics, vol.7 (4), pp. 525-545
9. BONI J.B., NEUROUTH A., CHANGENET C., VILLE F.: “Experimental investigations on churning power losses generated in a planetary gear set”. Bulletin of the JSME, Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol.11, n°6, 12p.
10. VAUCHERET A., NICOLI C., CARTON J.F., JACQUET P.: « Influence of Process Parameters on Ceroxide Formation in Low-Carbon Steels ». Journal of Casting & Materials Engineering, vol.1, n°4, pp.90-96
11. NICOLI C., VAUCHERET A., CARTON J.F., JACQUET P.: « Relationship between inclusion population and deoxidation process in low carbon steels”. Journal of Casting & Materials Engineering, vol.1, n°4, pp.97-102

2016

1. VOELTZEL N., MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.: « On the influence of helix angle and face width on gear windage losses”. Proc. IMechE, Part C, Journal of Mechanical Engineering Science, Vol.230, No. 7-8, pp. 1101-1112
2. CHANGENET C., VILLE F., VELEX P.: « Thermal behavior of a high-speed gear unit”. Gear Technology, Vol. 33, No. 1, pp. 38-41
3. BENALLOUCH M., CHANGENET C., CHARVET J.N., VAUDREY A., SICARD F.: “Pompes à chaleur – Les apports de la commande prédictive ». Revue Générale du Froid & du conditionnement d’air, n°1156, pp. 16-22
4. NOYEL J.P., VILLE F., JACQUET P., GRAVOUIL A., CHANGENET C.: « Development of a granular cohesive model for rolling contact fatigue analysis: crystal anisotropy modeling”. Tribology Transactions, Vol. 59, No. 3, pp. 469-479
5. SIAD A., BESNARD A., NOUVEAU C., JACQUET P.: « Critical angles in DC magnetron glad thin films ». Vacuum, vol. 131, pp. 305-311

Before 2016

1. MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.:
   “Investigations on CFD simulations for predicting windage power losses in spur gears”. ASME Journal of Mechanical Design vol.133 (2), 2011, pp. 024501-1/024501-7.
2. LEPRINCE G., CHANGENET C., VILLE F., VELEX P., DUFAU C., JARNIAS F.:
   “Influence of aerated lubricants on gear churning losses – an engineering model”. Tribology Transactions, vol. 54 (6), 2011, pp. 929-938.
3. CHANGENET C., LEPRINCE G., VILLE F., VELEX P.:
   “A note on flow regimes and churning loss modeling”. ASME Journal of Mechanical Design, vol.133 (12), 2011, pp. 121009-1/121009-
4.  DURAND de GEVIGNEY J., CHANGENET C., VILLE F.,
   VELEX P.:
   “Thermal modelling of a back-to-back gearbox test machine: Application to the FZG test rig”. IMechE, Part J, Journal of Engineering Tribology, vol.226 (6), 2012, pp. 501-515.
5. MATTERA J.P., GLISES R., BAUCOUR P., VAUDREY A., VERSCHELDE S., CHAMAGNE D.: “Electrothermal modelling of the railroads catenaries”. IET Electrical Systems in Transportation, vol. 2 (3), 2012, pp.110-118.
6. MOINARD-CHECOT D., RIGOLLET C., LOURDIN P.:
   “Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details”. Powder Technology vol.208 (2), 2011, pp. 472-479.
7. JACQUET P., COUDERT J.B., LOURDIN P.:
   “How different steel grades react to a salt bath nitrocarburizing and post-oxidation process: influence of alloying elements”. Surface&Coatings Technology vol.205 (16), 2011, pp. 4064-4067.
8. MOINARD D.:
   “Le procédé PIM : une combinaison innovante entre métallurgie des poudres et injection plastique”. Traitements & Matériaux, n°412, 2011, pp. 26-31.
9. CIESLIK J., JACQUET P., FLECHE D.:
   “Amélioration de la durée de vie d’outils de coupe pour l’usinage du bois à l’aide de la nitruration”. Traitements & Matériaux, n°412, 2011, pp. 44-48.
10. MULIN H., JACQUET P., LAMBERTIN M., MOINARD-CHECOT D., BIHR J.C.:
    “Contribution to the development of 18 carat gold alloy shaped by MIM”. Powder Injection Moulding International vol.5 (2), 2011, pp. 66-70.
11. CIESLIK J., JACQUET P., TLILI B., MULIN H.:
    “Decrease of compound layer thickness obtained in plasma nitriding of alloyed steels by diffusion stage”. Journal of Materials Science and Engineering, vol. 1 (7A), 2011, pp. 974-980.
12. GOLABCZAK M., PAWLAK W., SZYMANSKI W., JACQUET P., FLITI R.: “Properties of PVD coatings manufactured on X38CrMoV5-1 steel for plastic moulding applications”. Non-conventional machining processes, Journal of Machine Engineering, vol. 12 (2), 2012, pp. 37-45.
13.  GOLABCZAK M., JACQUET P.:
    “Thickness evaluation of the carbon coatings manufactured on magnesium alloys using optical profiler”. Non-conventional machining processes, Journal of Machine Engineering, vol. 12 (2), 2012, pp. 29-36.
14.  JACQUET P., GOLABCZAK M., LOURDIN P.:
    “Experimental characterizations of non-seizing solutions for plastic moulding tools”. Applied Surface Science, vol. 261, 2012, pp. 824-829.
15. GOLABCZAK M., JACQUET P., NOUVEAU C., FLITI R.:
    “Tribological investigations of TiC+a-C:H coatings manufactured on X38CrMoV5-1 steel using PVD technology”. Defect and Diffusion Forum, vol.334-335, 2013, pp. 97-104.
16. GOLABCZAK M., JACQUET P., NOUVEAU C., FLITI R.:
    “Low friction MoS2TiW coatings manufactured on X38CrMoV5-1 steel using PVD method”. Materialwissenschaft und Werktofftechnik, vol.44 (5), 2013, pp. 395-402.
17. JACQUET P., MARRAY T., FABRE A., PEREZ G., MOINARD D.:
    “Determination of carbon and nitrogen profile after a low pressure carbonitriding treatment”. Polish ceramic bulletin, vol.115, 2013, pp. 287-294.
18. GOLABCZAK M., GOLABCZAK A., KONSTANTYNOWICZ A., JACQUET P.:
    “Cellular automata for modelling growth of the carbon-like layers with using ideas of surface thermodynamics”. Wulfenia journal, vol.20, n°3, 2013, pp. 2
19. BELIARDOUH N.E., NOUVEAU C., WALOCK M.J., JACQUET P.:
    « A study of the wear performance of duplex treated commercial low-alloy steel against alumina and WC balls”. Surface and Coatings Technology, vol.259, Part C, 2014, pp. 483-494.
20. MARRAY T., JACQUET P., MANSORI M., FABRE A., BARRALLIER L.:
    « A thermodynamic and experimental study of low-alloy steels after carbonitriding in a low-pressure atmosphere”. Metal Science and Heat Treatment, vol.56, Issue 7-8, 2014, pp. 434-439.
21. NOYEL J.P., JACQUET P., VILLE F., GRAVOUIL A., CHANGENET C.:
    « Modèle mésoscopique de la durée de vie en régime de fatigue de contact de roulement ». Annales de Chimie – Science des Matériaux, vol. 39, no. 3-4, 2015, pp. 193-200.
22. SIAD A., NOUVEAU C., BESNARD A., JACQUET P., QUESADA J.:
    « Etude d’un traitement duplex sur le comportement tribologique ». Annales de Chimie – Science des Matériaux, vol. 39, no. 3-4, 2015, pp. 201-208.
23. NOYEL J.P., VILLE F., JACQUET P., GRAVOUIL A., CHANGENET C.:
    « Development of a granular cohesive model for rolling contact fatigue analysis: crystal anisotropy modeling”. Tribology Transactions, vol. 59, no. 3, 2016, pp. 469-479.
24. SIAD A., BESNARD A., NOUVEAU C., JACQUET P.: « Critical angles in DC magnetron glad thin films« .Vacuum, vol. 131, 2016, pp. 305-31
25. VAUDREY A., BAUCOUR P., LANZETTA F., GLISES R.:
    “Detailed analysis of an endoreversible fuel cell: maximum power and optimal operating temperature determination”. Frontiers in Heat and Mass Transfer, vol. 3 (3), 2012, 033001-8p.
26. BACHMAN J., CHARVET M., SANTAMARIA A., TANG H.Y., PARK J.W., WALKER R.:
    “Experimental investigation of the effect of channel length on performance and water accumulation in a PEMFC parallel flow field”. International Journal of Hydrogen Energy, vol. 37 (22), 2012, pp. 17172-17179.
27. LEPRINCE G., CHANGENET C., VILLE F., VELEX P.:
    “Investigations on oil flow rates projected on the casing walls by splashed lubricated gears”. Advances in Tribology, vol. 2012, article ID 365414, 2012, 7p.
28. PALLAS S., MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.:
    “A windage power loss model based on CFD study about volumetric flow rate expelled by spur gears”. Mechanics & Industry, vol.13 (5), 2012, pp. 317-323.
29. REGUILLET V., VAUDREY A., MOUTIN S., MONTAUT A., FRANCOIS X., BAUCOUR P., GLISES R.: “Definition of efficiency criteria for a fuel cell humidifier: application to a low power proton exchange membrane fuel cell system for negative surrounding temperatures”. Applied Thermal Engineering, vol.58, 2013, pp. 382-393.
30. DURAND de GEVIGNEY J., VILLE F., CHANGENET C., VELEX P.:
    “Tooth friction losses in internal gear: analytical formulation and application to planetary gears”. IMechE, Part J, Journal of Engineering Tribology, vol.227 (5), 2013, pp. 476-485.
31. PALLAS S., MARCHESSE Y., CHANGENET C., VILLE F., VELEX P.:
    “Application and validation of a simplified numerical approach for the estimation of windage power losses in spur gears”. Computers & Fluids, vol.84, 2013, pp. 39-45.
32. MARCHESSE Y., CHANGENET C., VILLE F.:
    « Numerical investigations on drag coefficient of balls in rolling element bearing ». Tribology Transactions, vol.57 (5), 2014, pp. 778-785.
33.  NEUROUTH A., CHANGENET C., VILLE F., ARNAUDON A.:
    « Thermal modeling of a grease lubricated thrust ball bearing ». IMechE, Part J, Journal of Engineering Tribology, vol.228 (11), 2014, pp. 1266-1275.
34. VAUDREY A., LANZETTA F., FEIDT M.:
    « H.B. Reitlinger and the origins of the efficiency at maximum power formula for heat engines”. Journal of Non-Equilibrium Thermodynamics, vol.39, Issue 4, 2014, pp. 199-203.
35. NEUROUTH A., CHANGENET C., VILLE F., VELEX P., OCTRUE M.:
    “Is splash lubrication compatible with efficient gear units for high-speed applications?”. Power Transmission Engineering, vol. 9, no. 7, 2015, pp. 48-52.
36. TOURET T., CHANGENET C., VILLE F., CAVORET J., ABOUSLEIMAN V. : « Experimental investigations on the effect of micropitting on friction – Part 1 ». Tribology International.
37. QUIBAN R., CHANGENET C., MARCHESSE Y., VILLE F., BELMONTE J. : « Churning losses of spiral bevel gears at high rotational speed ». IMechE, Part J, Journal of Engineering Tribology.

Defended doctoral dissertations (since 2008)

• Thèse de Jérôme DURAND de GEVIGNEY : Power losses in a high power planetary gearbox, 2013
• Thèse de François POULY : Thermo-mechanical modeling of a high-speed ball bearing, 2010
• Thèse d’Hossein FALLAHSOHI : Dynamic modeling of two-phase heat exchangers applied to refrigeration units controlled by an advanced control, 2011
• Thèse de Gauthier LEPRINCE : Mechanical friction losses and lubrication in a gearbox, 2011
• Thèse d’Hubert MULIN : Study of the chemical and microstructural evolution during consolidation by sintering of an 18-carat gold alloy after shaping by injection of metal powders, 2012
• Thèse d’Emeline FAUGERE : Optimization of an autonomous taxiing system – analysis of the thermal behavior of the actuator gearbox, 2012
• Thèse de Tarek MARRAY : Production of carbonitrided parts using powder injection molding technology, 2012
• Thèse de Dominique COTTON : The study of Tantalum hemicarbide formation through a cementation process under reduced pressure, 2015
• Thèse de Jean-Philippe NOYEL : Analysis of crack initiation and contact fatigue damage: numerical approach by a cohesive model at the grain scale, 2015
• Thèse d’Adrien NEUROUTH : The study of the energy performance of a high-speed power transmission, 2016
• Thèse de Charly KONE : The study of the acoustic behaviour of extractor hoods, 2016
• Thèse de Marine MENUT : Modeling the endovascular treatment of thoracic aortic aneurysms, 2017
• Thèse de Sandrine LARUELLE : The study of the thermal capacity of a geared motor
• Thèse de Charlotte FOSSIER : The study of tooth parameters influencing the performance of a bevel gear and integration into a global truck axle model
• Thèse de Grégoire ISAAC : The study of the risks of seizing on aeronautical gear transmissions
• Thèse d’Orlando CHIRINOS : The Dynamics of improvement initiatives – Maintaining the performance cycle
• Thèse de Dimitri NIEL : The study of the thermomechanical behavior of roller bearings, 2019
• Thèse de Cécile NICOLI : Study and optimization of the solidification of low alloy steels during the foundry process by inoculation, 2019
• Thèse de Thomas TOURET : Health Monitoring : impact of a toothing or bearing defect on an aeronautical transmission, 2019
• Thèse de Laurent CARETTE : Study of the mechanisms of formation of carbides obtained by low pressure cementation of a Tantalum alloy, 2019
• Thèse de Etienne BOSSY : Influence of the characteristics of nitrided microstructures on the initiation of surface spalling by contact fatigue, 2019
• Thèse de Jean-Baptiste BONI : Thermal modeling of an epicyclic gear train lubricated by splashing, 2020
• Thèse de Guillaume VOUAILLAT : Effect of property gradient materials on contact fatigue, 2020
• Thèse de Romain QUIBAN : Modeling of the losses of the rotating elements by interaction with the lubricants in the gearboxes of helicopters, 2020
• Thèse de Pierre BROSSIER : Modeling the thermal behavior of bearings in helicopter gearboxes, 2020
• Thèse de Alexandre KIRCHER : Resilient estimation in large systems, 2021

Thèses en cours

Doctorat de Nicolas GRENET DE BECHILLON sur l’Etude des risques de grippage sur des transmissions aéronautiques à engrenages.Thèse sous convention CIFRE avec SAFRAN TS et co-encadrée par le LabECAM d’ECAM LaSalle et le LaMCoS de l’INSA Lyon.

Doctorat de Morgan SOUETRE sur la Simulation numérique de la fonderie d’aciers, visant à déterminer et optimiser des paramètres de calage pour les aciers faiblement alliés coulés en moule sable à vert. Thèse sous allocation ECAM via un contrat avec Safe Metal et co-encadrée par le LabECAM ECAM LaSalle, ARTS (LaBoMaP – Cluny) et SMI.

Doctorat de Loup Plantevin sur le développement d’un procédé de traitement de surface par impulsions électromagnétiques et étude des transformations électriques, magnétiques, microstructurales et mécaniques induites. Thèse sous convention INSA Lyon et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon.

Doctorat de Zineb Mrabbaj sur le développement d’un outil d’ordonnancement structurant et apprenant pour l’organisation globale d’une unité de production. Thèse sous convention CIFRE avec MANITOWOC et co-encadrée par le LabECAM et le laboratoire G-SCOP de Grenoble INP.

Doctorat de Lucas Fourel sur la modélisation à l’échelle du grain de l’initiation de fissure en fatigue de contact. Thèse sous convention INSA Lyon et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon.

Doctorat d’Antonin Monot sur la maintenance prédictive d’un motoréducteur via l’analyse conjointe de signaux électriques et de mesures de température. Thèse sous convention CIFRE avec REEL (dans le cadre du CIRTrans) et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon.

Doctorat de Florian de Cadier de Veauce sur l’étude des pertes par traînée et des transferts thermiques au sein de paliers à éléments roulants. Thèse sous convention CIFRE avec le CETIM (dans le cadre du laboratoire commun TRANSMECA) et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon.

Doctorat de Lionel Darul sur l’influence de la modélisation thermomécanique des roulements sur l’étude du comportement thermique des pompes à vide. Thèse sous convention CIFRE avec Pfeiffer Vacuum et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon.

Doctorat de Jordan Licorne sur la fabrication additive de pièces métalliques par impression 3D de filaments : étude de l’interaction matériaux/procédés/propriétés. Thèse sous convention CIFRE avec NANOE et co-encadrée par le LabECAM et le laboratoire MATEIS de l’INSA Lyon

Doctorat de Gaël Spaggiari sur la maintenance prédictive d’une transmission électrique via l’analyse conjointe de signaux mécaniques, électriques et thermiques reposant sur l’exploitation d’un jumeau numérique multi-physique. Thèse sous convention CIFRE avec VOLVO Renault Trucks et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon

Doctorat de Marie Winger sur l’étude des pertes engendrées par la mise en mouvement des fluides (air et/ou huile) par les composants mobiles d’un train planétaire lubrifié par injection. Thèse sous convention CIFRE avec SAFRAN Transmission Systems (dans le cadre de la Chaire IMTA) et co-encadrée par le LabECAM et le LaMCoS de l’INSA Lyon